Showing posts with label pecs. Show all posts
Showing posts with label pecs. Show all posts

Thursday, February 7, 2013

Assuming a Neutral Position

Today, I would like to discuss assuming a neutral position.  You might think that I am going to get political here, but I'm not.

Think of an automobile in neutral.  When the gear shift is in neutral, no gears are engaged.  As I understand it, the gears are totally detached from the operation of the vehicle.  In a neutral position, the gears are not doing any work to move the car forward or backward.  You might say that the gears are "resting."

Our muscles also benefit from time in a "neutral" position.

When you rest, are you really resting?

There is a relationship between the "neutral" position and achieving actual rest.  If muscles are partially engaged, they will not be resting.  The continual fatigue of these muscles will lead to trigger points that are very hard to get rid of.

Try an experiment, when you lie down to go to sleep, focus on each area of your body.  Note if it feels rested or if it still feels tense.  What happens if you consciously encourage that part of your body to rest?  Does it feel comfortable?  Or does it feel like it cannot disengage?

You may need to arrange pillows to help support areas that seem unable to release.  For example, if you are a side sleeper, a pillow between your legs can be just the ticket for your hips and legs.  Make sure that it is long enough to support knees and ankles.  Experiment with pillow height until you find one that can hold your legs in "neutral."

You can put a pillow behind your back and in front of your body to help support those muscles.  A pillow to hug is also a good option to help your arm and shoulder muscles to assume a more neutral position.

It is also important to make sure that your neck is parallel to the bed.

Side sleeper.  Both neck and head are parallel to bed.  This is a good neutral position. 
Proper support for the head can be tricky to achieve and it is a very individual thing.  In my case, my neck area, where I need higher support, is fairly short, and my head area, where I need lower support is longer.  If the pillow is too big, the poofiness sometimes lifts my head too high and takes my neck out of the neutral position.

Side sleeper.  The pillow is too big.  The head is being forced up by the top of the pillow.  This is not a neutral position.
The same thing can happen if the pillow is too low.

Side sleeper.  Started out with good support for neck, but the pillow is too low and the weight of the head takes it out of neutral.
I find that I need to use two different pillows to achieve the correct balance for me.

When you consider that headaches are often caused by trigger points in the neck muscles, you can understand the importance of getting the right balance here.  It is definitely worth the investment if you can find a pillow or pillows that enable your body to rest in a neutral position.

If you sleep on your back, try a fairly low pillow between your legs to slightly elevate the insides of the knees, and a low, comfortable pillow under your neck for support.  Make sure the pillow is not under your shoulders.  They need to rest, too.  If your shoulders are lifted up all night, this is hard on the pectoral (chest) muscles because it keeps them shortened all night, and on the various shoulder and back muscles because it keeps them stretched all night.  You want them to be in neutral. (Sometimes a lightweight, rolled-up towel is just right for under the neck.)

If you sleep on your stomach, I understand this is the hardest on your neck muscles.  It is impossible to put the neck in a truly neutral position because your neck will be turned to one side or the other, stretching one side of the neck and shortening the other side.  If you must sleep on your stomach, use as low a pillow as possible.  You might also try sleeping on your side with a couple of pillows arranged to support your stomach.  That way you can get the feel of sleeping on your stomach without actually being on your stomach. 

As you experiment with each position, notice the difference.  I am often surprised at how much tension is in my body when I am supposedly resting.  No wonder I have awakened many times feeling like I have not rested at all!

When it is time for bed, taking the time to arrange things so your body will be properly supported and in a genuine "neutral" position is a wonderful gift to give yourself.    Be sure to be awake enough when you are going to bed to do this.  If you just crash into bed exhausted (and I know many of you do), you may end up stuck with whatever position you landed in, and it may not be a good one.

Monday, January 16, 2012

More Trigger Point Tools

Having the right tool can make all the difference. For example, it would not be very effective to use a screwdriver to hammer in a nail, and it would not make much sense to use a hammer on a screw. Sometimes, we can substitute another tool and it will be somewhat effective, like using a knife as a screwdriver, but it will be faster and more efficient to use the right tool. Sometimes, we have tools that are good enough, but a more specialized tool would make it so much easier.

I have introduced you to what I would consider the mainstays of a trigger point tool kit:  the lacrosse ball and the theracane (or backnobber). Today, I will introduce you to a few other tools that can be useful, especially for specific jobs.

Interestingly enough, bouncy balls are great tools for getting to some of the harder to reach muscles. They come in different sizes so you can usually find something that will fit your particular purpose. They are not as durable as lacrosse balls, but they are relatively inexpensive and they will last for quite a while.

Two sizes of bouncy balls and lacrosse ball.  

I have a favorite size that I have been using to massage the muscles in my arm while I am recovering from my elbow injury. There are many narrow muscles in several layers that I am working and this ball is perfect for this. The ball a size up is too big and the ball a size down is too small.  

Using bouncy ball on the outer elbow area.  

Using bouncy ball on inside area of elbow and down the arm.  

 Using the opposite hand, I press and roll the ball into my muscle. I use the heel of my palm to get particularly deep, but I also use the entire palm of my hand, and my four fingers held straight and close together to form one tool. Using this method, I roll the ball around my arm, and as I find trigger points, I work them for a few strokes before continuing on.

Getting in position to use the opposite hand on outer elbow.  The ball is placed between the palm and the opposite elbow. 
I have used a bigger size (the purple and orange ball in the photo above) for my triceps, and it is perfect for that. When I first got off the pain pills and I was starting to venture out into the world again, I went grocery shopping. I took that ball with me, and whenever my elbow started to really ache, I worked my triceps with the ball, and it relieved my pain.  

As part of my physical therapy, I have to wear a splint on my arm for 6 to 8 hours a day to help me stretch my muscles back to where they were before the accident. Often, my arm starts to ache when I wear this, but I can work some trigger points through the back side of it, which is open. I can also take the splint off temporarily, work some trigger points on the inside and put it back on. When I have worn it for several hours, my arm is usually pretty tender all over, and it hurts to move it. I use the ball to work all of the areas that are tender and stiff.  

The difference between the two arms.  I have gained quite a bit of range of motion, but I have some way to go still. My arm usually extends farther after I have had my arm in the hot whirlpool bath for 15 minutes at the physical therapist's office.   
My arm in the splint.  
Sometimes, I can just set the ball on the table, or another hard surface like a book, and roll the exposed part of my arm on the ball.  

Another tool that I have used recently is called the Palm Massager (made by a company called Pressure Positive, available online).  


Palm massager.
This handy tool is held in the palm of the hand. The fingers fit comfortably into grooves molded into the tops of the three "arms" of the tool. Each "arm" has a rounded end. Two of these ends are relatively small, while the remaining end is larger.  

The finger fits in the groove on top of the arm.

This design makes it easy to use quite a bit of pressure without totally trashing your fingers. I have used it for trigger points in the back of the neck, and, lately, I have used it to work my inner elbow. It is good for going deep.  

Using on the back of the neck.  It is even better if you can lean back into it, so that the muscles that you are working are relaxed.  

Late one night, I was using the palm massager on my inner elbow, and I was able to find some places that hurt that I had not been able to reach before. I worked them, and I could see that it was increasing my mobility. I was pretty excited. The next morning, I was dancing and singing: I've been dreaming of an arm that moves... to the tune of, "I've been dreaming of a true love's kiss," from the movie, Enchanted. It has become sort of a theme song for me.  

Another tool is the Knobble (also by Pressure Positive, available online).


The Knobble
This tool looks a lot like a round door knob. It has a rubber-like surface on its side, which helps in gripping the tool. I often like to hold the tool sideways and use the rubberized side for the trigger point therapy.

The Knobble, side view.
The Knobble is great for places that you want to get into deep with minimal effort. I have used it on my arms, my quads (but I decided later that I like the lacrosse ball against the wall better for the quads) and also on my pecs (using the side).


In position to use the Knobble on my arm.  My fingers are held up to show how the Knobble is placed.  They are wrapped around the Knobble when working the trigger points.  
Holding the Knobble sideways to work the pecs.  
I have even used it on the muscles of my head, staying on the gentler, rubber side.

Using the side of the Knobble on my temporalis muscle. 
Experimenting with different tools, you will probably find some that you prefer over others for particular tasks. The more comfortable you are using a tool, the more likely you will be to use it. You will also probably be more effective, giving the right amount of pressure, not too much, not too little.


Sunday, November 13, 2011

What I've been doing - Part I

Note:  Refer to the "What Happened..." post for background information.  

One of the first things that I did once we got my arm stabilized in a sling and once we had given me some ibuprofen, was to work any trigger points that I thought would have been affected by my fall.

I visualized what might have happened in the fall. I pictured my elbow hitting the ground. I could imagine that muscles and bones in my upper arms and my forearms would be jarred quite hard. I could see that all of my shoulder muscles were probably affected. They would have to work hard to keep my shoulder in place.

I steered clear of working trigger points in my arm in the beginning because I did not want to inadvertently put pressure on the broken bone, wherever it might be.

I started out working my infraspinatus, supraspinatus, and my pecs.

The infraspinatus and supraspinatus are the muscles that lie on top of the shoulder blade, or scapula. There is a raised part of the shoulder blade that goes across the upper half of the shoulder blade. It is sometimes referred to as the scapular spine. The infraspinatus is the muscle that lies below the scapular spine. (Infraspinatus means "below or under the spine.") The supraspinatus is a muscle that lies above the scapular spine.

I worked the infra- and supra- spinatus with a lacrosse ball against the wall. I was very careful to keep my injured arm from moving.  It felt good, not only because it felt good to work the trigger points, which did need work, but also because working the trigger points released endorphins; my pain was partially relieved.

Since I was already up, I decide to work my gluts, lower back, and quads, too. A fall like I had probably involved most of my body, now that I thought about it.

I also worked my pecs. I could feel that they were very tight.

During our first visit to the doctor, the practitioner suggested that I unwrap my arm from time-to-time and work on trying to extend my range of motion.  Later, when I was getting zero pain relief from the meds, I wondered if I had a pinched nerve somewhere.  It felt very much like pinched nerves I've had in the past.  I knew that working my trigger points would help to release something if it were pinched, so I began to work on the upper arm and lower arm muscles.  I had also been working on my scalenes and sternocleidomastoids.

The only measurable pain relief that I got during this time period (between the first doctor's visit and the ER visit), was when I worked my trigger points in my arms.  I worked from the top of the upper arm down toward my elbow, and from the wrist area up toward the elbow.  I used supported thumb or supported fingers, and sometimes used a pinching technique, which I know is not very ergonomic, but I was trying to be careful to avoid the bones as much as possible.  I could feel each muscle relax and the pain subside as I released its trigger points.  It became more difficult, however, as I got closer to the elbow. I was so exhausted but so happy that my pain had subsided enough for me to get to sleep. I would get to sleep, but I'd wake up an hour or two later with screaming pain again. The muscles that had just been loose and relaxed were now tight as a spring.

I knew there must be something else going on. At this point, I wondered if anyone would be able to help me with my pain at all. Here I was taking Lortab (I did not realize that I had been prescribed a half dose), and it was not helping at all. The only thing that had helped me up to that point was trigger point therapy, and that was only temporary. Plus, I was exhausted from no sleep, and from tensing up against the pain. I could feel the tightness going further up my arm, into my shoulder and neck muscles. I could also feel that my abdomen was as hard as a rock, and my hips and upper legs were tensing up, too. I felt like a giant corkscrew.

In the middle of the night on Wednesday/Thursday, my husband and I decided to try the ER. I really didn't know if they would be able to help. I anticipated them trying to take an x-ray of my elbow again. I hadn't been able to extend my elbow enough at the on-call doctor and the technician there was not very sympathetic. She said, "I warned you that it would not be fun."

Before we left for the ER, I worked my upper arm, shoulder, and pec muscles. I wanted to have as much flexibility coming into that experience as possible.

(To be continued...)

Saturday, October 22, 2011

Working Your Pecs







I got up early this morning and I was stiff, but I was so tired still and didn't really want to get up and work trigger points. I decided to work my chest muscles. I could work them without too much effort, without getting out of bed, and I was pleasantly surprised at how much it helped to release the tension in other muscles as well.  

Your "pecs," or pectoralis major are your large chest muscles. They are three large bands of muscles that fan from each side just below your shoulder to the middle of your chest (p. 136, if you have the Trigger Point Therapy Workbook).  Among other things, your pectorals work with your upper back muscles to keep your posture upright. If your pecs are tight, they are putting constant pressure on those upper back muscles. They tend to pull your shoulder toward the front.  

There is a domino effect to this, which can end up sending trigger points to the sternocleidomastoids and the scalenes, muscles in your neck which can be responsible for pain and stiffness in a lot of areas. There are other chest muscles as well, and it is not necessary to differentiate them at this point. Working any of them will do some good.  

The chest muscles are more tender than the back muscles (in my experience, anyway) and it does not take much to work them. Remember that you want to "hurt good." Don't try to rub them out; you will make things worse. Just work them. You can come back every couple of hours or so if you want to.  

I use one hand with four fingers held together as the precision tool, and place my other hand on the back of the "precision tool" and push. 






Place opposite hand on back of "precision tool." 



Lying in bed is actually a great place to work these because I can place the elbow of my working hand (the hand that is pushing) on the bed, so it takes very little effort to work these.  






Top hand is the "power."  Bottom hand is the "tool."

To be more specific, lying on my right side, I use my right arm (which I am lying on), bent at the elbow, to support my left arm, which is also bent at the elbow.  The left hand has fingers held together.  Using my right hand, I press the left finger tips into the trigger points.
Sw



itch sides to use the other hand.  


Search all around your chest area.  For women, you are searching in the muscles, so you are working around and under the breast.  (The breast itself is not muscle.)  




Working the pecs and other chest muscles.
If you have never done this before, you may be shocked, alarmed, or even frightened at how many places hurt.  These are trigger points.  They hurt a lot, but working them a little bit does a lot of good.  










If you are already up and about, another way to work at least some of your chest muscles is with a lacrosse ball against a wall that is close to a corner, so that you can lean in further without being blocked by the wall. 


This was written October 1, 2011.  Extra information added October 22, 2011.

Note:  Please be patient with me as I learn how to use these publishing tools.  I have tried several times, for example, to fix the word "switch" above, but it keeps publishing the split word.  Eventually, I will figure out why it is happening and come back and fix it.