Assuming a Neutral Position

Today, I would like to discuss assuming a neutral position.  You might think that I am going to get political here, but I'm not.

Think of an automobile in neutral.  When the gear shift is in neutral, no gears are engaged.  As I understand it, the gears are totally detached from the operation of the vehicle.  In a neutral position, the gears are not doing any work to move the car forward or backward.  You might say that the gears are "resting."

Our muscles also benefit from time in a "neutral" position.

When you rest, are you really resting?

There is a relationship between the "neutral" position and achieving actual rest.  If muscles are partially engaged, they will not be resting.  The continual fatigue of these muscles will lead to trigger points that are very hard to get rid of.

Try an experiment, when you lie down to go to sleep, focus on each area of your body.  Note if it feels rested or if it still feels tense.  What happens if you consciously encourage that part of your body to rest?  Does it feel comfortable?  Or does it feel like it cannot disengage?

You may need to arrange pillows to help support areas that seem unable to release.  For example, if you are a side sleeper, a pillow between your legs can be just the ticket for your hips and legs.  Make sure that it is long enough to support knees and ankles.  Experiment with pillow height until you find one that can hold your legs in "neutral."

You can put a pillow behind your back and in front of your body to help support those muscles.  A pillow to hug is also a good option to help your arm and shoulder muscles to assume a more neutral position.

It is also important to make sure that your neck is parallel to the bed.

Side sleeper.  Both neck and head are parallel to bed.  This is a good neutral position. 

Proper support for the head can be tricky to achieve and it is a very individual thing.  In my case, my neck area, where I need higher support, is fairly short, and my head area, where I need lower support is longer.  If the pillow is too big, the poofiness sometimes lifts my head too high and takes my neck out of the neutral position.

Side sleeper.  The pillow is too big.  The head is being forced up by the top of the pillow.  This is not a neutral position.

The same thing can happen if the pillow is too low.

Side sleeper.  Started out with good support for neck, but the pillow is too low and the weight of the head takes it out of neutral.

I find that I need to use two different pillows to achieve the correct balance for me.

When you consider that headaches are often caused by trigger points in the neck muscles, you can understand the importance of getting the right balance here.  It is definitely worth the investment if you can find a pillow or pillows that enable your body to rest in a neutral position.

If you sleep on your back, try a fairly low pillow between your legs to slightly elevate the insides of the knees, and a low, comfortable pillow under your neck for support.  Make sure the pillow is not under your shoulders.  They need to rest, too.  If your shoulders are lifted up all night, this is hard on the pectoral (chest) muscles because it keeps them shortened all night, and on the various shoulder and back muscles because it keeps them stretched all night.  You want them to be in neutral. (Sometimes a lightweight, rolled-up towel is just right for under the neck.)

If you sleep on your stomach, I understand this is the hardest on your neck muscles.  It is impossible to put the neck in a truly neutral position because your neck will be turned to one side or the other, stretching one side of the neck and shortening the other side.  If you must sleep on your stomach, use as low a pillow as possible.  You might also try sleeping on your side with a couple of pillows arranged to support your stomach.  That way you can get the feel of sleeping on your stomach without actually being on your stomach. 

As you experiment with each position, notice the difference.  I am often surprised at how much tension is in my body when I am supposedly resting.  No wonder I have awakened many times feeling like I have not rested at all!

When it is time for bed, taking the time to arrange things so your body will be properly supported and in a genuine "neutral" position is a wonderful gift to give yourself.    Be sure to be awake enough when you are going to bed to do this.  If you just crash into bed exhausted (and I know many of you do), you may end up stuck with whatever position you landed in, and it may not be a good one.

How "cruel" are your shoes?

I read a story written by comedian Steve Martin some years ago entitled, "Cruel Shoes." In this story, a woman goes to a shoe store to purchase shoes, and is not satisfied with any that are brought out to her by the salesperson until she finds a pair that are so uncomfortable that they contort her feet and make them bleed. When she tries these on, she is finally pleased, and decides to get them.

When I was younger, there were times when I walked all over BYU campus in heels, sometimes spiked, not all of the time, but at least once a week for a school year when we had church services in a building on the opposite side of campus from where we lived. I knew it wasn't good for my feet; however, I have short legs, and I thought wearing high heels made my legs look longer. Besides, I did not want to make myself look weird. So, I kept wearing them and put my feet up to rest when I got home.

In my late thirties to early forties, I noticed that whenever I wore high heels (as opposed to lower heels), my knees started to hurt a lot within 15 minutes. It was so bad that I could not stand, but had to sit down. They kept hurting for a while after I took the heels off. I stuck to low-heeled pumps for several years, until a few years ago, I could not even wear those. The bottom of my foot had started to hurt in addition to the knee pain. It felt like I was walking on the bones, with no cushioning at all. I had to stop wearing dress shoes completely. Also, there was only one style of athletic shoe that did not make my knees hurt, and the last time I went to get another pair, they were discontinued.

Thankfully, it was about that time that I found out about trigger point therapy. I worked the trigger points in my legs to help get rid of the pain. The pain in the knees came from my thighs, and the pain in the foot came from my calves. But the pain was quick to return when I walked for any length of time.

I learned that I have something called Morton's foot (not to be confused with Morton's neuroma), that is, I have a longer second metatarsal (bone behind the second toe) than the first metatarsal. This predisposes me to problems with my feet and indirectly causes pain in the rest of my body. This difference in metatarsal length made it so I was walking on two points of my foot, instead of three--kind of like walking around on an ice skate, but without the high top boot. The muscles farther up my body were working very hard just to keep me standing.

Fortunately, The Trigger Point Therapy Workbook had a fairly simple and inexpensive way to compensate for my foot structure (See p. 243). I cut out an oval or circle of moleskin about an inch-and-a-half in diameter for each foot. I stuck it (it is a peel-and-stick product) on the bottom side of a foam insert that had been cut to fit my shoe, in the area under the first metatarsal.

Foam insert, cut to size. 

Example of piece of moleskin attached to bottom of foam insert. 

I was amazed at the difference this made. I could actually stand tiptoe, something I had not been able to do for a long time. It eliminated my knee and foot pain (as long as I stick with low shoes). Putting the pad under the first metatarsal gives it a little more "length" so that it can hit the ground before the second metatarsal.  The first and fifth metatarsals, and the heel, act as a tripod to bear the weight of the body.

So, if you have ongoing foot pain, knee pain, or back pain, it might be a good idea to take a look at the bones that protrude when you bend your toes. (There is more information on p. 243-245).

To fit yourself with one of these "custom orthotics," flex your big toe upward and feel for the bony part in the center of the fleshy pad below the big toe.

Feel the bone in the fleshy pad below the big toe.  

Trim the circle or oval of moleskin to fit comfortably under that bone, without going under the bone that is further into the foot (the second metatarsal). Check where to place the pad* first (before you peel off the backing), then peel the backing off and stick it to the bottom of the foam insert. Then place the insert in your shoe. Mine usually last a month or two before the insert starts to wear out.

Also, consider the type of shoe that you wear. Clair Davies writes, "Wearing high heels keeps the soleus [this is a large flat muscle that wraps around the back of your calf] muscles shortened, which is a sure way to create and perpetuate trigger points. The ankle instability typically caused by high heels also strains the soleus muscles with each step." (p. 239).  Trigger points in the soleus can cause "deep pain in the sacroiliac area and maintain spasms in the muscles of the low back" (p. 238). It also sends pain to the back of the calf, heel of the foot, and inside ankle.

So, how cruel are your shoes?

_________________________

*I have noticed that some people have a very large difference in length of the first and second metatarsal.  They may need to have a thicker pad to compensate.  Experiment a little bit to see what helps you.

Working with the Theracane

The theracane is an incredible tool. It allows you to deep-massage places that you would not be able to do by yourself.

In this post, I will demonstrate some ways to use the theracane on four areas: the scalenes, the muscles in the back of the neck and head, the muscles under the arm, and the spinal muscles.

Before we get started, a word of caution... It is easy to get really carried away with the theracane. You might start really digging in, and later end up very sore. You might even end up with bruises. (Ask me how I know.) So, it is a good idea to go easy in the beginning. You will learn how much pressure to use on each area as you continue to practice.

Also, it is a good idea to have a layer of clothing of some kind between you and the theracane, especially when you are working more sensitive areas.

Scalenes

In a previous post, I demonstrated how to work your scalenes (muscles deep in the side of the neck) with supported fingers as the tool. It is also possible to work many of the scalenes with the theracane. It is a good idea to have worked them with your fingers first, so that you have an idea of where they are located, how the trigger points feel, and how much pressure to apply.

Start out with the theracane upside down. Place one hand on the ball at the end of the curved area. This will be your "anchor hand." Place the other hand up on the straight area, somewhere between the two handles. This will be your "guiding hand."

One hand on end of cane.

Alternatively, you can place the guiding hand on the lower handle. You may find that this gives you even better leverage.  

Guiding hand on lower handle.

Experiment with positioning your guiding hand until you can easily push the small knob into your scalenes. The idea is to use as little effort as possible and to let the leverage of the theracane do the work.  

Working scalene with theracane.

Change position for the fourth scalene.

In position to work fourth scalene.

Bring one hand up and place the other on the ball at the end of the theracane (not shown in picture). Press up on the bottom of the theracane to put pressure on the working knob. You may want to put your upper hand on top of the closest handle for more leverage.

Working fourth scalene.

Muscles in back of neck and head

As usual, do not press directly onto the bones of the spine. You are fine to gently press on your skull, however.

There are several layers of muscles in the back of the neck and head, some of them very small. Using one of the small knobs of the theracane can be an effective way to work these trigger points.

To work these muscles, bring the theracane to the back of the neck with the curve of the theracane extending forward. Bring the higher small knob to the back of the neck, holding the theracane in the middle of the curve on one side and just in front of the ball at the end of the stick on the other.

You can work the points by pressing the theracane forward, or you can hold the theracane stationary and lean your head back into the theracane.

Working the back of the neck.

You can use even less effort by bracing the theracane handles into the back of a chair, and leaning into the knob. I sometimes do this lying down in bed also, but you must be extremely slow and gentle when you lean back. I have had times when I had a headache, that I put the straight part of the cane (between the knobs, or right in the curve) right where the back of the head starts to curve (in the suboccipital area) and leaned back into it. It made it possible for me to get to sleep when nothing else worked.  

Brace the theracane "handles" against the back of the chair.

Muscles under the arm 

The muscles under the arm can be hard to get to and they are very important. Many of them are also quite tender, so go very, very easy.  

First, place the theracane in front of you with the curve extending back. Place the knob at the end of the curve, under your arm.  

In position for working under the arm.

Holding the end of the theracane with one hand, grab the top handle with the other hand.  

Ready to work the trigger points under the arm.

Use the leverage of the theracane to work the trigger points under your arm.  

Working trigger points under the arm with the theracane.
Side view.

Spinal muscles 

The theracane is particularly useful for getting the muscles right next to your spine.  

Get in position by bringing the theracane behind you with the curve extending forward.  

Getting in position to work the spinal muscles.

Place your arm behind the theracane on the straight end, in a place that is comfortable for your size body. In my case, it is between the lower handle and the end knob.  

Place your hand behind the theracane.

Place the top small knob of the theracane onto either side of the spine. (Never use the theracane directly on the spine.)  Slide the theracane up and down searching for trigger points. Then work them as you find them. Most of these will be quite small, so your stroke will be shorter and more focused.   

These are just some of the ways that you can use the theracane.

Dealing with Tension/Anxiety

I could feel my tension increasing over the past few days.  I woke up with my teeth clenched (harder than usual), and I could feel my shoulders and neck getting tighter and tighter.  Because of my tension, I really didn't feel like doing much that I considered productive--I couldn't seem to focus--and so I "wasted" some time.  I responded by tensing up even more.  

When you feel tense and/or anxious, it is hard to motivate oneself to work trigger points.  (It's hard to motivate oneself to do anything.)  Even if you want to, you may not be thinking clearly, or you may feel overwhelmed and not know where to start.  You may think that it may not work anyway, etc. But, working them will help--sometimes a lot.

The number one thing to do is to start somewhere, anywhere.  There is a domino effect, and releasing the tension in one muscle will help release tension in other muscles.  Once you get the ball rolling, you will feel a noticeable lessening of tension.

I have found that if I try too hard to work my shoulder and neck muscles in the beginning, I am not always successful, maybe because I am using the muscles that I am trying to relax, and I am just too tense to make it work at that point.  However, if I work them after I have worked some other muscles, I have more success.

Today, I will give you an overview of what I might work if I am feeling tense.  Generally, I don't do this all in one go.  I might do two or three areas, take a break, and then continue later with the other areas.

First, I use the lacrosse ball against the wall to work my gluts (these are your backside muscles).  Remember not to press hard against the bone.  But, press as much as you want on the muscles.

Working the hamstrings with a lacrosse ball. 

Next, I sit on a hard chair and work my hamstrings (the muscles in back of the upper leg).  Using your body weight, move your leg over the ball, from side to side and from your knee to your sit bones.  As usual, work both legs.  If you have never done this before, you may be surprised by how many places hurt.  You may also be surprised at how loose and limber you feel after working your gluts, hamstrings and quads.   Your leg muscles are somewhat tender, so don't press too hard, but you will need to press fairly firmly in order for it to be effective.

Then, I usually work my quads (muscles in front and side of the upper leg).  The trigger points on the outer side of the leg are particularly painful.  Take it easy.  You may want to work around them at first, and gradually work up to working on them directly.  

Place lacrosse ball in the front of your thigh.  

Working the sides of your quads.  

Be sure to stay off the bones of your spine.  

I then move up to my back. Make sure to stay off of the spine.  You can work the muscles close to the spine.

If you are able to lean back far enough, you can move up to your shoulder area.

Working the serratus anterior (below the armpit).

I like to work the muscles under my armpit (the serratus anterior). Raise your arm and put the ball just below your armpit. These trigger points are extremely tender, so be careful. There are also some potent trigger points just below where the arm and back meet, on both the back and the arm.

Working the upper arm.

Work your upper arms--front, back and sides. 

Working the inside of the forearm. 

Put your hand behind your back to work the inside of the arm.  Be careful here.  These muscles can be tender.  

Working the outer forearm. 

Work the outside of the arms by leaning against the ball.

Then I use my theracane on my neck and shoulder area.

Today, I found a big trouble-maker in the back of my neck.  It is easier to work now that I have relaxed my shoulder and arm muscles enough to effectively use the theracane, and I have relaxed some of the surrounding muscles.

(Note:  Some of these first posts are adapted from emails that I sent out before I started the blog.  This was from October 12, 2011.  I am keeping track of the dates because I am always looking for patterns in my pain, including how often certain types of symptoms appear.)